From: Brian Dennis (brian@labforge.com)
Date: Sat Jul 26 2003 - 13:03:58 GMT-3
I would not spend time learning what the absolute shortest way to type
one command is over another when preparing for the lab. If you type "in
r f0/1 -24" and someone else types "int range fa0/1 - 24" it's not going
to matter. Being very solid with the technologies and knowing how to
configure/troubleshoot them off the top of your head is going to be what
matters in the lab.
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
John Matijevic
Sent: Saturday, July 26, 2003 7:53 AM
To: Mike Williams; 'Brian Dennis'; 'Shane Marquis';
ccielab@groupstudy.com
Subject: Re: 3550 int range command
Hello Team,
I would recommend getting used to using the shortcuts in the IOS,
although
im not a CCIE yet, but will be soon, I believe this will save time not
only
with this particular configuration but with others as well, it does take
time to learn the shortcuts within, IOS, but I believe this time saved
can
be very beneficial, again if you know shortcuts no need for aliases, and
less chance for typing mistake in my opinion, the quickest way to
configure
in your question would be the following:
in r f0/1 -24
Sincerely,
Matijevic
----- Original Message -----
From: "Mike Williams" <ccie2be@swbell.net>
To: "'Brian Dennis'" <brian@labforge.com>; "'Shane Marquis'"
<Shane.Marquis@busint.com.au>; <ccielab@groupstudy.com>
Sent: Saturday, July 26, 2003 10:29 AM
Subject: RE: 3550 int range command
> D'OH! You're right! T'was very late last night when I was typing
that
> response =)
>
> Mike W.
>
> -----Original Message-----
> From: Brian Dennis [mailto:brian@labforge.com]
> Sent: Saturday, July 26, 2003 1:21 AM
> To: 'Shane Marquis'; 'Mike Williams'; ccielab@groupstudy.com
> Subject: RE: 3550 int range command
>
>
> That's because there isn't an interface FastEthernet0/0 on a 3550. The
> first interface is FastEthernet0/1.
>
> Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Shane Marquis
> Sent: Friday, July 25, 2003 11:15 PM
> To: 'Mike Williams'; 'ccielab@groupstudy.com'
> Subject: RE: 3550 int range command
>
> Nah sorry that doesn't work - it offers me the option ie.
> (config) int range?
> Gives fastethernet as an option but it doesn't let me use it it.
> (config) int range fast 0/0 - 24
> gives
> invalid input with the arrow pointing at the beginning of fast
>
>
> thanks shane
>
>
>
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:54 GMT-3