Re: Routed ports on the 3550

From: pierreg (pierreg@mail.planetkc.com)
Date: Fri Jul 25 2003 - 18:31:28 GMT-3

• Next message: Joe Martin: "RE: Access-list in route-map not blocking routes"
• Previous message: Joe Martin: "RE: Access-list in route-map not blocking routes"
• Maybe in reply to: pierreg : "Routed ports on the 3550"
• Next in thread: Deepesh Chouhan: "RE: Routed ports on the 3550"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Answering my own question:

You could attach a PC on the routed port and make it the default gateway on the PC. Anything else you can do with a routed port?

Pierre-Alex

---------- Original Message ----------------------------------

 "A routed port is a physical port that acts like a port on a router; it does not have to be connected to a router."

I don't get it! A routed port not connected to a router. How would you use the port then?

http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12111ea1/3550scg/swint.htm#xtocid9

Thanks,

Pierre-Alex

• Next message: Joe Martin: "RE: Access-list in route-map not blocking routes"
• Previous message: Joe Martin: "RE: Access-list in route-map not blocking routes"
• Maybe in reply to: pierreg : "Routed ports on the 3550"
• Next in thread: Deepesh Chouhan: "RE: Routed ports on the 3550"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:53 GMT-3