From: Deepesh Chouhan (deepesh@cisco.com)
Date: Fri Jul 25 2003 - 19:23:51 GMT-3
I would use a router port to get routes from other routers (like ospf, rip
routes).
This will be then used by VLAN traffic
Routed port can also be used as an uplink to backbone (exit point for vlans)
thanks
deepesh
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> MMoniz
> Sent: Friday, July 25, 2003 2:06 PM
> To: pierreg; ccielab@groupstudy.com
> Subject: RE: Routed ports on the 3550
>
>
> You would use it just like you would on a router. Connect it to a layer 2
> only switch and have that
> as the default gateway is one use. Connect it to another router
> on the same
> subnet is another.
>
> HTH
>
>
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> pierreg
> Sent: Friday, July 25, 2003 5:00 PM
> To: ccielab@groupstudy.com
> Subject: Routed ports on the 3550
>
>
> "A routed port is a physical port that acts like a port on a router; it
> does not have to be connected to a router."
>
> I don't get it! A routed port not connected to a router. How
> would you use
> the port then?
>
> http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12111ea1
/3550scg/s
wint.htm#xtocid9
Thanks,
Pierre-Alex
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:53 GMT-3