From: William Lijewski (ccie8642@hotmail.com)
Date: Fri Jul 25 2003 - 13:22:42 GMT-3
Try using a key of 1 and see what happens.
Bill Lijewski
CCIE #8642
>From: "ccie2be" <ccie2be@nyc.rr.com>
>Reply-To: "ccie2be" <ccie2be@nyc.rr.com>
>To: "Group Study" <ccielab@groupstudy.com>
>Subject: Verifying per Interface OSPF authen
>Date: Fri, 25 Jul 2003 11:56:48 -0400
>
> Hi,
>
>It seems that I got per interface authen to work with the following:
>
>R2 s1 -- area0 --- s1 R3
>
>R2
>int s1
>ip os authen
>ip os authentication-key 0 ccie
>
>
>R3
>int s1
>ip os authen
>ip os authentication-key 0 ccie
>
>A show ip os nei on both R2 and R3 shows a Full adjacency but when I do a
>"show ip os int s1",
>it says " Simple authentication enabled" but it also says "no key
>configured,
>using default key id 0"
>
>What does this mean?
>
>When I tried to configure message-digest authen, the same thing happened.
>Am
>I not doing this correctly?
>
>Thanks, Raj
>
>
>_______________________________________________________________________
>You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:53 GMT-3