From: ccie2be (ccie2be@nyc.rr.com)
Date: Fri Jul 25 2003 - 12:56:48 GMT-3
Hi,
It seems that I got per interface authen to work with the following:
R2 s1 -- area0 --- s1 R3
R2
int s1
ip os authen
ip os authentication-key 0 ccie
R3
int s1
ip os authen
ip os authentication-key 0 ccie
A show ip os nei on both R2 and R3 shows a Full adjacency but when I do a
"show ip os int s1",
it says " Simple authentication enabled" but it also says "no key configured,
using default key id 0"
What does this mean?
When I tried to configure message-digest authen, the same thing happened. Am
I not doing this correctly?
Thanks, Raj
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:53 GMT-3