From: Colin Barber (Colin.Barber@telewest.co.uk)
Date: Fri Jul 25 2003 - 05:51:57 GMT-3
You need supervisors with MSFCs to use Native IOS. A MSM will not do.
Colin
-----Original Message-----
From: George Gittins [mailto:g.gittins@edinburg.esc1.net]
Sent: 24 July 2003 15:14
To: ccielab@groupstudy.com
Subject: Convert 6009 to native
I have a 6009 cat based ios with a layer 3 card can migrate it to
native ios mode
Here is a output of the modules
MDF_6009 2:4> (enable) show module
Mod Slot Ports Module-Type Model Status
--- ---- ----- ------------------------- ------------------- --------
1 1 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE ok
2 2 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE standby
3 3 8 1000BaseX Ethernet WS-X6408A-GBIC ok
4 4 48 10/100BaseTX Ethernet WS-X6348-RJ-45 ok
5 5 4 Multilayer Switch WS-X6302-MSM ok
Mod Module-Name Serial-Num
--- ------------------- -----------
1 SAD043107H5
2 SAD04310K44
3 SAD04310C1B
4 SAD042906ZV
5 SAD03362471
Mod MAC-Address(es) Hw Fw Sw
--- -------------------------------------- ------ ----------
-----------------
1 00-02-7e-23-0d-16 to 00-02-7e-23-0d-17 3.2 5.3(1) 5.4(2)
00-02-7e-23-0d-14 to 00-02-7e-23-0d-15
00-d0-02-31-0c-00 to 00-d0-02-31-0f-ff
2 00-01-64-71-6c-9e to 00-01-64-71-6c-9f 3.2 5.3(1) 5.4(2)
00-01-64-71-6c-9c to 00-01-64-71-6c-9d
3 00-d0-d3-a6-fa-5a to 00-d0-d3-a6-fa-61 1.3 5.4(2) 5.4(2)
4 00-30-96-35-b3-80 to 00-30-96-35-b3-af 1.1 5.3(1) 5.4(2)
5 00-30-96-1b-44-58 to 00-30-96-1b-44-5b 3.0 12.0(4a)WX
12.0(4a)WX5(11),
00-30-80-8b-63-b4 to 00-30-80-8b-67-b3
Mod Sub-Type Sub-Model Sub-Serial Sub-Hw
--- ----------------------- ------------------- ----------- ------
1 L2 Switching Engine II WS-F6020A SAD04310ACS 2.0
2 L2 Switching Engine II WS-F6020A SAD04310AE1 2.0
George Gittins
Network Maintenance Supervisor
ECISD
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:52 GMT-3