From: Glenn Johnson (gjcomcast@comcast.net)
Date: Fri Jul 25 2003 - 03:18:06 GMT-3
Tim,
Maybe it's just a typo -- regardless, I would have been tempted to do
this given the wording of the requirement:
traffic-shape rate 128000
traffic-shape adaptive 64000 (I would use this because of the "lower
bound" text - see below)
traffic-shape fecn-adapt
R7(config-if)#traffic-shape adaptive ?
<1-100000000> Lower Bound Target Bit Rate (bits per second)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Timothy Snow
Sent: Friday, July 25, 2003 1:24 AM
To: ccielab@groupstudy.com
Subject: GTS - Expert lab #33
Am I misreading the question? Here goes.
Configure GTS such that target bit rate is 128kbps, the lower bound target
bit rate is 64kbps and reflect fecn's as becns.
The Solution is as follows
traffic-shape rate 128000 64000 64000 1000
traffic-shape fecn-adapt
My solution was this
traffic-shape rate 128000 8000 64000 1000
traffic-shape fecn-adapt
Could someone explain possible what the question was looking for?
Tim
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:52 GMT-3