From: Jan-Willem (jbouman@cisco.com)
Date: Thu Jul 24 2003 - 07:02:34 GMT-3
copy slot0:<filename> slaveslot0:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/fun_r/frprt2/frd2001.htm
At 04:29 07/24/2003, wing_lam@jossynergy.com wrote:
>Hi Dave,
>
>Can you show me a link on how to download the IOS from pri to slave?
>
>Thx,
>BBD (Big Black Dog)
>
>
>
>
>
> MADMAN
>
> <dave@interprise. To:
> wing_lam@jossynergy.com
> com> cc:
> ccielab@groupstudy.com
> Subject: Re: 7500 RSP
> image
> 07/24/2003
> 03:54
>
> AM
>
> Please respond
> to
>
> dmadlan
>
>
>
>
>
>
>
>
>
>
>
>wing_lam@jossynergy.com wrote:
> > Hi Dave,
> >
> > It shows me a lot of register error and something like "force system to
> > crash" and writingsomething to "crashinfo"
> >
> > I changed to another images "rsp-isv-mz.121-20.bin" but this time the
> > gigabit Ethernet module disappeared, ATM OK.
> >
> > I then change to another image "rsp-p-mz.121-20.bin", this time all
> > interface disappeared (Giga + ATM)
> >
> > Finally I use rsp-pv-mz.121-19.E1.bin, it works.
> >
> > Just want to verify whether my VIP modules microcode need to be upgraded
> > to compatible with the IOS image. If yes, please tell me a good link
> > about this.
>
> No the microcode is bundled in the IOS. There are some PA's that
>don't play well with certain revisions of VIPs though.
>
> >
> > Also, I have a slave RSP, am I need to do anything to make the master and
> > slave sync?
>
> Config wise no but you need to download the IOS from the active to
>the slave.
>
> Dave
>
> >
> > Thx,
> >
> > BBD (Big Black Dog)
> >
> > MADMAN <dave@interprise.com>
> > Sent by: nobody@groupstudy.com
> > 07/22/2003 02:28 PM EST
> > Please respond to MADMAN
> >
> > To: wing_lam@jossynergy.com
> > cc: ccielab@groupstudy.com
> > bcc:
> > Subject: Re: 7500 RSP image
> >
> > When you say you can not boot the .19 image can you be more specific,
> > what happens, any error messages etc.?
> >
> > Off the top of my head it should boot the image. No you don't need a
> > RSP 8 or 16 and the boot images do not have to match.
> >
> > dave
> >
> > wing_lam@jossynergy.com wrote:
> >
> >>Hi group,
> >>
> >>Any body knows whether there is a compatibility issue for 75 RSP with
> >
> > i't
> >
> >>image? I am now running rsp-isv-mz.121-5a.E1.bin and it works fine. But
> >
> > if
> >
> >>I load rsp-isv-mz.121-19.E1.bin, the 75 cannot boot this image
> >>successfully. My RSP is RSP 4-50.
> >>
> >>Any issue about this we should cater in 75 series router? (say RSP
> >
> > should
> >
> >>be 8, or bootflash should compatible with the image etc.)
> >>
> >>I tried several images for everytime I upgrade the 75 imageand I just
> >
> > want
> >
> >>to ask whether I can determine it before the reboot.
> >>
> >>Thx,
> >>BBD (Big Black Dog)
> >>DISCLAIMER:- This email is confidential and intended only for the use
> >
> > of
> >
> >>the individual or entity named above and may contain information that
> >
> > is
> >
> >>privileged. If you are not the intended recipient, you are notified
> >
> > that
> >
> >>any dissemination, distribution or copying of this email is strictly
> >>prohibited. If you have received this email in error, please notify us
> >>immediately by return email or telephone and destroy the original
> >
> > message.
> >
> >>Thank you.
> >>
> >>
> >>_______________________________________________________________________
> >>You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> >>
> >>Subscription information may be found at:
> >>http://www.groupstudy.com/list/CCIELab.html
> >>
> >
> >
> > --
> > David Madland
> > CCIE# 2016
> > Sr. Network Engineer
> > Qwest Communications
> > 612-664-3367
> >
> > "Government can do something for the people only in proportion as it
> > can do something to the people." -- Thomas Jefferson
> >
> > _______________________________________________________________________
> > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > _______________________________________________________________________
> > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
>
>--
>David Madland
>CCIE# 2016
>Sr. Network Engineer
>Qwest Communications
>612-664-3367
>
>"Government can do something for the people only in proportion as it
>can do something to the people." -- Thomas Jefferson
>
>
>_______________________________________________________________________
>You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:51 GMT-3