From: MADMAN (dave@interprise.com)
Date: Thu Jul 24 2003 - 12:29:05 GMT-3
C7507A#dir disk0:
Directory of disk0:/
1 -rw- 19102960 Jun 02 2003 13:20:50 rsp-jsv-mz.122-11.T.bin
2 -rw- 17450992 Jul 23 2003 20:02:30 rsp-jsv-mz.122-17a.bin
41721856 bytes total (5165056 bytes free)
C7507A#copy disk0:rsp-jsv-mz.122-17a.bin slavedisk0:
Destination filename [rsp-jsv-mz.122-17a.bin]?
%Warning:There is a file already existing with this name
Do you want to over write? [confirm]
Dave
wing_lam@jossynergy.com wrote:
> Hi Dave,
>
> Can you show me a link on how to download the IOS from pri to slave?
>
> Thx,
> BBD (Big Black Dog)
>
>
>
>
> MADMAN
> <dave@interprise. To: wing_lam@jossynergy.com
> com> cc: ccielab@groupstudy.com
> Subject: Re: 7500 RSP image
> 07/24/2003 03:54
> AM
> Please respond to
> dmadlan
>
>
>
>
>
>
>
>
> wing_lam@jossynergy.com wrote:
>
>>Hi Dave,
>>
>>It shows me a lot of register error and something like "force system to
>>crash" and writingsomething to "crashinfo"
>>
>>I changed to another images "rsp-isv-mz.121-20.bin" but this time the
>>gigabit Ethernet module disappeared, ATM OK.
>>
>>I then change to another image "rsp-p-mz.121-20.bin", this time all
>>interface disappeared (Giga + ATM)
>>
>>Finally I use rsp-pv-mz.121-19.E1.bin, it works.
>>
>>Just want to verify whether my VIP modules microcode need to be upgraded
>>to compatible with the IOS image. If yes, please tell me a good link
>>about this.
>
>
> No the microcode is bundled in the IOS. There are some PA's that
> don't play well with certain revisions of VIPs though.
>
>
>>Also, I have a slave RSP, am I need to do anything to make the master and
>>slave sync?
>
>
> Config wise no but you need to download the IOS from the active to
> the slave.
>
> Dave
>
>
>>Thx,
>>
>>BBD (Big Black Dog)
>>
>>MADMAN <dave@interprise.com>
>>Sent by: nobody@groupstudy.com
>>07/22/2003 02:28 PM EST
>>Please respond to MADMAN
>>
>>To: wing_lam@jossynergy.com
>>cc: ccielab@groupstudy.com
>>bcc:
>>Subject: Re: 7500 RSP image
>>
>>When you say you can not boot the .19 image can you be more specific,
>>what happens, any error messages etc.?
>>
>>Off the top of my head it should boot the image. No you don't need a
>>RSP 8 or 16 and the boot images do not have to match.
>>
>> dave
>>
>>wing_lam@jossynergy.com wrote:
>>
>>
>>>Hi group,
>>>
>>>Any body knows whether there is a compatibility issue for 75 RSP with
>>
>>i't
>>
>>
>>>image? I am now running rsp-isv-mz.121-5a.E1.bin and it works fine. But
>>
>>if
>>
>>
>>>I load rsp-isv-mz.121-19.E1.bin, the 75 cannot boot this image
>>>successfully. My RSP is RSP 4-50.
>>>
>>>Any issue about this we should cater in 75 series router? (say RSP
>>
>>should
>>
>>
>>>be 8, or bootflash should compatible with the image etc.)
>>>
>>>I tried several images for everytime I upgrade the 75 imageand I just
>>
>>want
>>
>>
>>>to ask whether I can determine it before the reboot.
>>>
>>>Thx,
>>>BBD (Big Black Dog)
>>>DISCLAIMER:- This email is confidential and intended only for the use
>>
>>of
>>
>>
>>>the individual or entity named above and may contain information that
>>
>>is
>>
>>
>>>privileged. If you are not the intended recipient, you are notified
>>
>>that
>>
>>
>>>any dissemination, distribution or copying of this email is strictly
>>>prohibited. If you have received this email in error, please notify us
>>>immediately by return email or telephone and destroy the original
>>
>>message.
>>
>>
>>>Thank you.
>>>
>>>
>>>_______________________________________________________________________
>>>You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>>>
>>>Subscription information may be found at:
>>>http://www.groupstudy.com/list/CCIELab.html
>>>
>>
>>
>>--
>>David Madland
>>CCIE# 2016
>>Sr. Network Engineer
>>Qwest Communications
>>612-664-3367
>>
>>"Government can do something for the people only in proportion as it
>>can do something to the people." -- Thomas Jefferson
>>
>>_______________________________________________________________________
>>You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>>
>>Subscription information may be found at:
>>http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>_______________________________________________________________________
>>You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>>
>>Subscription information may be found at:
>>http://www.groupstudy.com/list/CCIELab.html
>>
>
>
>
> --
> David Madland
> CCIE# 2016
> Sr. Network Engineer
> Qwest Communications
> 612-664-3367
>
> "Government can do something for the people only in proportion as it
> can do something to the people." -- Thomas Jefferson
>
>
>
>
>
>
>
-- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367"Government can do something for the people only in proportion as it can do something to the people." -- Thomas Jefferson
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:52 GMT-3