From: wing_lam@jossynergy.com
Date: Thu Jul 24 2003 - 00:29:21 GMT-3
Hi Dave,
Can you show me a link on how to download the IOS from pri to slave?
Thx,
BBD (Big Black Dog)
MADMAN
<dave@interprise. To: wing_lam@jossynergy.com
com> cc: ccielab@groupstudy.com
Subject: Re: 7500 RSP image
07/24/2003 03:54
AM
Please respond to
dmadlan
wing_lam@jossynergy.com wrote:
> Hi Dave,
>
> It shows me a lot of register error and something like "force system to
> crash" and writingsomething to "crashinfo"
>
> I changed to another images "rsp-isv-mz.121-20.bin" but this time the
> gigabit Ethernet module disappeared, ATM OK.
>
> I then change to another image "rsp-p-mz.121-20.bin", this time all
> interface disappeared (Giga + ATM)
>
> Finally I use rsp-pv-mz.121-19.E1.bin, it works.
>
> Just want to verify whether my VIP modules microcode need to be upgraded
> to compatible with the IOS image. If yes, please tell me a good link
> about this.
No the microcode is bundled in the IOS. There are some PA's that
don't play well with certain revisions of VIPs though.
>
> Also, I have a slave RSP, am I need to do anything to make the master and
> slave sync?
Config wise no but you need to download the IOS from the active to
the slave.
Dave
>
> Thx,
>
> BBD (Big Black Dog)
>
> MADMAN <dave@interprise.com>
> Sent by: nobody@groupstudy.com
> 07/22/2003 02:28 PM EST
> Please respond to MADMAN
>
> To: wing_lam@jossynergy.com
> cc: ccielab@groupstudy.com
> bcc:
> Subject: Re: 7500 RSP image
>
> When you say you can not boot the .19 image can you be more specific,
> what happens, any error messages etc.?
>
> Off the top of my head it should boot the image. No you don't need a
> RSP 8 or 16 and the boot images do not have to match.
>
> dave
>
> wing_lam@jossynergy.com wrote:
>
>>Hi group,
>>
>>Any body knows whether there is a compatibility issue for 75 RSP with
>
> i't
>
>>image? I am now running rsp-isv-mz.121-5a.E1.bin and it works fine. But
>
> if
>
>>I load rsp-isv-mz.121-19.E1.bin, the 75 cannot boot this image
>>successfully. My RSP is RSP 4-50.
>>
>>Any issue about this we should cater in 75 series router? (say RSP
>
> should
>
>>be 8, or bootflash should compatible with the image etc.)
>>
>>I tried several images for everytime I upgrade the 75 imageand I just
>
> want
>
>>to ask whether I can determine it before the reboot.
>>
>>Thx,
>>BBD (Big Black Dog)
>>DISCLAIMER:- This email is confidential and intended only for the use
>
> of
>
>>the individual or entity named above and may contain information that
>
> is
>
>>privileged. If you are not the intended recipient, you are notified
>
> that
>
>>any dissemination, distribution or copying of this email is strictly
>>prohibited. If you have received this email in error, please notify us
>>immediately by return email or telephone and destroy the original
>
> message.
>
>>Thank you.
>>
>>
>>_______________________________________________________________________
>>You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>>
>>Subscription information may be found at:
>>http://www.groupstudy.com/list/CCIELab.html
>>
>
>
> --
> David Madland
> CCIE# 2016
> Sr. Network Engineer
> Qwest Communications
> 612-664-3367
>
> "Government can do something for the people only in proportion as it
> can do something to the people." -- Thomas Jefferson
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367"Government can do something for the people only in proportion as it can do something to the people." -- Thomas Jefferson
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:51 GMT-3