From: Deepesh Chouhan (deepesh@cisco.com)
Date: Wed Jul 23 2003 - 08:45:57 GMT-3
You are right, it only affect internal routes
Routes R7 is sending to R5/R6 are not "D EX" but "D".
This is because we are summarizing them on ethernet interface of R7.
thats why that config will work
Hope that helps
thanks
deepesh
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Snow, Tim
> Sent: Tuesday, July 22, 2003 10:11 PM
> To: 'ccielab@groupstudy.com'
> Subject: eigrp distance for external routes
>
>
> I'd just like bounce this question off you so I know i'm not loosing my
> mind.
> The following command under eigrp will only affect internal eigrp routes
> correct?
>
> distance 95 172.30.200.7 0.0.0.0 2
>
> IP Expert Lab #30 says "r5 should know these routes with an AD of
> 95" but I
> think the only way I can do this is like this
>
> distance eigrp 90 95
>
> But that will affect all of them.
>
> Could anyone think of something i'm missing.
>
> Tim
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:50 GMT-3