From: Banlan Chen (banlan.chen@lycos.com)
Date: Wed Jul 23 2003 - 00:08:17 GMT-3
Yes, I did. But nothing from rip into ospf database.
thanks!
----------- Original Message ---------
DATE: Wed, 23 Jul 2003 09:39:38 From: a9605355 <a9605355@graduate.hku.hk> To: "Mustafa Bayramov (ICT/IT)" <mustafa@azercell.com>,Banlan Chen <banlan.chen@lycos.com>, ccielab <ccielab@groupstudy.com> Cc:
>have you tried : >show ip rip database to verify ? > >>===== Original Message From "Mustafa Bayramov (ICT/IT)" ><mustafa@azercell.com> ===== >>Also check your IOS versions I remember IOS 12.1.X had bug related to >>tagging RIPv2. >> >> >>Regards >> >> >>Mustafa M Bayramov >> >>CISSP >>CCNP,CCDP,Cisco Security Specialist >>Network engineer and security analyst >> >>"I know nothing except the fact of my ignorance." Socrates >> >> >>-----Original Message----- >>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of >>Jonathan V Hays >>Sent: Tuesday, July 22, 2003 4:49 PM >>To: 'Banlan Chen'; ccielab@groupstudy.com >>Subject: RE: redistribution between ospf and rip2 >> >>Try assigning default metrics. >> >> >>-----Original Message----- >>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of >>Banlan Chen >>Sent: Tuesday, July 22, 2003 4:08 PM >>To: ccielab@groupstudy.com >>Subject: redistribution between ospf and rip2 >> >> >>Hi All, >> >>I am tring to mutual redistribute ospf and rip2 with tag, but it doesn't >>work. from RIP side I can see the ospf routes, but at ospf side I can't >>see any routes from RIP. Could someone figure out what's problem in my >>configuration. Thanks a lot. >> >>interface Loopback0 >>ip address 150.50.6.6 255.255.255.255 >>! >>interface Ethernet0 >>ip address 150.50.100.6 255.255.255.0 >>! >>interface Serial0 >>ip address 150.50.10.6 255.255.255.0 >>encapsulation frame-relay >>ip ospf network point-to-point >>frame-relay map ip 150.50.10.2 421 broadcast >>frame-relay map ip 150.50.10.6 421 >>frame-relay lmi-type ansi >>! >>router ospf 1 >>log-adjacency-changes >>redistribute rip subnets route-map rip-os >>network 150.50.6.6 0.0.0.0 area 0 >>network 150.50.10.0 0.0.0.255 area 0 >>! >>router rip >>version 2 >>redistribute ospf 1 metric 1 route-map os-rip >>passive-interface default >>no passive-interface Ethernet0 >>network 150.50.0.0 >>! >>route-map os-rip deny 10 >>match tag 120 >>! >>route-map os-rip permit 20 >>set tag 110 >>! >>route-map rip-os deny 10 >>match tag 110 >>! >>route-map rip-os permit 20 >>set tag 120 >>-- >> >>--------- Original Message --------- >> >>DATE: Fri, 18 Jul 2003 19:19:11 >>From: "Banlan Chen" <banlan.chen@lycos.com> >>To: ccielab@groupstudy.com >>Cc: >> >>>Hi Group, >>> >>>When I configure RIP over two FR main interfaces, I should enable >>split-horizon on each interface or just enable it at one of these >>interfaces. >>>Under ATM interface, Do I need configure ip split-horizon for RIP and >>EIGRP? >>>Thanks in advance. >>> >>>Banlan >>> >>> >>>____________________________________________________________ >>>Get advanced SPAM filtering on Webmail or POP Mail ... Get Lycos Mail! >>>http://login.mail.lycos.com/r/referral?aid=27005 >>> >>> >>>_______________________________________________________________________ >>>You are subscribed to the GroupStudy.com CCIE R&S Discussion Group. >>> >>>Subscription information may be found at: >>>http://www.groupstudy.com/list/CCIELab.html >>> >> >> >> >>____________________________________________________________ >>Get advanced SPAM filtering on Webmail or POP Mail ... Get Lycos Mail! >>http://login.mail.lycos.com/r/referral?aid=27005 >> >> >>_______________________________________________________________________ >>You are subscribed to the GroupStudy.com CCIE R&S Discussion Group. >> >>Subscription information may be found at: >>http://www.groupstudy.com/list/CCIELab.html >> >> >>_______________________________________________________________________ >>You are subscribed to the GroupStudy.com CCIE R&S Discussion Group. >> >>Subscription information may be found at: >>http://www.groupstudy.com/list/CCIELab.html >> >> >>_______________________________________________________________________ >>You are subscribed to the GroupStudy.com CCIE R&S Discussion Group. >> >>Subscription information may be found at: >>http://www.groupstudy.com/list/CCIELab.html > > >
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:49 GMT-3