From: Banlan Chen (banlan.chen@lycos.com)
Date: Wed Jul 23 2003 - 00:06:48 GMT-3
Hi,
Thanks for your reply. My version is 12.2(1d) C2500-JK8OS-L.
Banlan
----------- Original Message ---------
DATE: Wed, 23 Jul 2003 02:02:14 From: "Mustafa Bayramov (ICT/IT)" <mustafa@azercell.com> To: "'Banlan Chen'" <banlan.chen@lycos.com>, ccielab@groupstudy.com Cc:
>Also check your IOS versions I remember IOS 12.1.X had bug related to >tagging RIPv2. > > >Regards > > >Mustafa M Bayramov > >CISSP >CCNP,CCDP,Cisco Security Specialist >Network engineer and security analyst > >"I know nothing except the fact of my ignorance." Socrates > > >-----Original Message----- >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of >Jonathan V Hays >Sent: Tuesday, July 22, 2003 4:49 PM >To: 'Banlan Chen'; ccielab@groupstudy.com >Subject: RE: redistribution between ospf and rip2 > >Try assigning default metrics. > > >-----Original Message----- >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of >Banlan Chen >Sent: Tuesday, July 22, 2003 4:08 PM >To: ccielab@groupstudy.com >Subject: redistribution between ospf and rip2 > > >Hi All, > >I am tring to mutual redistribute ospf and rip2 with tag, but it doesn't >work. from RIP side I can see the ospf routes, but at ospf side I can't >see any routes from RIP. Could someone figure out what's problem in my >configuration. Thanks a lot. > >interface Loopback0 >ip address 150.50.6.6 255.255.255.255 >! >interface Ethernet0 >ip address 150.50.100.6 255.255.255.0 >! >interface Serial0 >ip address 150.50.10.6 255.255.255.0 >encapsulation frame-relay >ip ospf network point-to-point >frame-relay map ip 150.50.10.2 421 broadcast >frame-relay map ip 150.50.10.6 421 >frame-relay lmi-type ansi >! >router ospf 1 >log-adjacency-changes >redistribute rip subnets route-map rip-os >network 150.50.6.6 0.0.0.0 area 0 >network 150.50.10.0 0.0.0.255 area 0 >! >router rip >version 2 >redistribute ospf 1 metric 1 route-map os-rip >passive-interface default >no passive-interface Ethernet0 >network 150.50.0.0 >! >route-map os-rip deny 10 >match tag 120 >! >route-map os-rip permit 20 >set tag 110 >! >route-map rip-os deny 10 >match tag 110 >! >route-map rip-os permit 20 >set tag 120 >-- > >--------- Original Message --------- > >DATE: Fri, 18 Jul 2003 19:19:11 >From: "Banlan Chen" <banlan.chen@lycos.com> >To: ccielab@groupstudy.com >Cc: > >>Hi Group, >> >>When I configure RIP over two FR main interfaces, I should enable >split-horizon on each interface or just enable it at one of these >interfaces. >>Under ATM interface, Do I need configure ip split-horizon for RIP and >EIGRP? >>Thanks in advance. >> >>Banlan >> >> >>____________________________________________________________ >>Get advanced SPAM filtering on Webmail or POP Mail ... Get Lycos Mail! >>http://login.mail.lycos.com/r/referral?aid=27005 >> >> >>_______________________________________________________________________ >>You are subscribed to the GroupStudy.com CCIE R&S Discussion Group. >> >>Subscription information may be found at: >>http://www.groupstudy.com/list/CCIELab.html >> > > > >____________________________________________________________ >Get advanced SPAM filtering on Webmail or POP Mail ... Get Lycos Mail! >http://login.mail.lycos.com/r/referral?aid=27005 > > >_______________________________________________________________________ >You are subscribed to the GroupStudy.com CCIE R&S Discussion Group. > >Subscription information may be found at: >http://www.groupstudy.com/list/CCIELab.html > > >_______________________________________________________________________ >You are subscribed to the GroupStudy.com CCIE R&S Discussion Group. > >Subscription information may be found at: >http://www.groupstudy.com/list/CCIELab.html > > >_______________________________________________________________________ >You are subscribed to the GroupStudy.com CCIE R&S Discussion Group. > >Subscription information may be found at: >http://www.groupstudy.com/list/CCIELab.html >
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:49 GMT-3