From: Charles Church (cchurch@wamnet.com)
Date: Tue Jul 22 2003 - 22:43:32 GMT-3
I guess it can vary between CLECs. Most of my experience has been with
Verizon in the northeast. Hasn't always been good experiences either ;)
Chuck Church
CCIE #8776, MCNE, MCSE
Wam!Net Government Services
13665 Dulles Technology Dr. Ste 250
Herndon, VA 20171
Office: 703-480-2569
Cell: 703-819-3495
cchurch@wamnet.com
PGP key: http://pgp.mit.edu:11371/pks/lookup?search=chuck+church&op=index
-----Original Message-----
From: Mike Williams [mailto:ccie2be@swbell.net]
Sent: Tuesday, July 22, 2003 9:37 PM
To: 'Charles Church'; 'Phil'; ccielab@groupstudy.com
Subject: RE: Point-to-point T1 clock source
All of the P2P T1s that we have, the provider provides the clock for
both ends, so we set the CSU/DSU to receive clocking from the network.
Mike W.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Charles Church
Sent: Tuesday, July 22, 2003 7:56 PM
To: Phil; ccielab@groupstudy.com
Subject: RE: Point-to-point T1 clock source
>From what I've seen, if you've gotten a full P2P T1 from a provider,
you'll provide the clock. If you've gotten a fractional P2P T1, usually
you'll provide it.
Chuck Church
CCIE #8776, MCNE, MCSE
Wam!Net Government Services
13665 Dulles Technology Dr. Ste 250
Herndon, VA 20171
Office: 703-480-2569
Cell: 703-819-3495
cchurch@wamnet.com
PGP key:
http://pgp.mit.edu:11371/pks/lookup?search=chuck+church&op=index
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Phil
Sent: Tuesday, July 22, 2003 8:43 PM
To: ccielab@groupstudy.com
Cc: ciscostudent1@yahoo.com.br
Subject: OT: Point-to-point T1 clock source
Sorry for the OT but I had a discussion this afternoon at work regarding
the clock source for a point-to-point T1.
I am sure the clock must be provided by one of the CSU/DSU and the other
must be set to line/network. Everybody else argued both sides must be
set to line/network.
I called into the Telco and they told me they do not supply clock for
point-to-point T1s, thus one of the ends must supply the clock.
I was not able to find any docs on the web regarding this. Does anyone
have a link to a document for this matter?
Thanks in advance and sorry for the OT,
Phil
---------------------------------
Yahoo! Mail
Mais espago, mais seguranga e gratuito: caixa postal de 6MB, antivmrus,
protegco contra spam.
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:49 GMT-3