From: ccie2be (ccie2be@nyc.rr.com)
Date: Tue Jul 22 2003 - 19:14:49 GMT-3
Hi,
I'm trying to verify that I configured policy routing correctly. This
particular scenario is from IPExpert lab 326.
The requirement is that SMTP traffic from subnet 172.16.2.0 to subnet
172.16.136.0 be routed through R1.
After configuring policy routing, I tried to test that it works correctly. I
used the trace command and set it to use port 25, the SMTP port. The result
showed that traffic was load balancing between 3 paths.
While I'm fairly confident I set up the policy routing correctly, I'm not as
sure about whether I'm testing it correctly.
I'm hoping somebody can tell me if my problem is the way I'm testing the
config or if I should trust the test results and figure out what's wrong with
the config itself. Thanks, Raj
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:49 GMT-3