From: wing_lam@jossynergy.com
Date: Tue Jul 22 2003 - 17:04:42 GMT-3
Hi,
I have experience the same before and I also posted the same question in
this group. In my case, while I use LAN to connect, my IP is PATted.
I solved it finally but reboot the PC. I don't knoe why but I guess if
you use VPN from PATted environment then change to dialup to re-connect
VPN, you need to reboot the PC.
Thx,
BBD (Big Black Dog)
Barry Bocaner <barry@bocaner.net>
Sent by: nobody@groupstudy.com
07/22/2003 03:43 PM AST
Please respond to Barry Bocaner
To: Tomasz Szymanski <tomasz.szymanski@trecom.pl>
cc: ccielab@groupstudy.com
bcc:
Subject: Re: VPN Client MTU problems
On Mon, 21 Jul 2003, Tomasz Szymanski wrote:
> I have some problems with Ciesco Secure VPN Client. When I connect to
my
> customer's site from the local network everything is ok, but when I
> connect through dial-up networking I can't get to inside hosts (login
to
> firewall is ok).
> I thought it's connected with MTU problem but I tried MTu=1300 and it
> doesn't work.
Doesn't sound like MTU at all. There is a note about this in the release
notes -- make sure client for microsoft networks is selected on the
networking tab of your dial-up networking properties. This is in the
release notes(!)
-- --=-=-=-=-=-=-=-=-=-=-=- Barry J. Bocaner barry@bocaner.net http://web.bocaner.net -=-=-=-=-=-=-=-=-=-=-=-=
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:49 GMT-3