From: wing_lam@jossynergy.com
Date: Tue Jul 22 2003 - 17:00:11 GMT-3
Hi Dave,
It shows me a lot of register error and something like "force system to
crash" and writingsomething to "crashinfo"
I changed to another images "rsp-isv-mz.121-20.bin" but this time the
gigabit Ethernet module disappeared, ATM OK.
I then change to another image "rsp-p-mz.121-20.bin", this time all
interface disappeared (Giga + ATM)
Finally I use rsp-pv-mz.121-19.E1.bin, it works.
Just want to verify whether my VIP modules microcode need to be upgraded
to compatible with the IOS image. If yes, please tell me a good link
about this.
Also, I have a slave RSP, am I need to do anything to make the master and
slave sync?
Thx,
BBD (Big Black Dog)
MADMAN <dave@interprise.com>
Sent by: nobody@groupstudy.com
07/22/2003 02:28 PM EST
Please respond to MADMAN
To: wing_lam@jossynergy.com
cc: ccielab@groupstudy.com
bcc:
Subject: Re: 7500 RSP image
When you say you can not boot the .19 image can you be more specific,
what happens, any error messages etc.?
Off the top of my head it should boot the image. No you don't need a
RSP 8 or 16 and the boot images do not have to match.
dave
wing_lam@jossynergy.com wrote:
> Hi group,
>
> Any body knows whether there is a compatibility issue for 75 RSP with
i't
> image? I am now running rsp-isv-mz.121-5a.E1.bin and it works fine. But
if
> I load rsp-isv-mz.121-19.E1.bin, the 75 cannot boot this image
> successfully. My RSP is RSP 4-50.
>
> Any issue about this we should cater in 75 series router? (say RSP
should
> be 8, or bootflash should compatible with the image etc.)
>
> I tried several images for everytime I upgrade the 75 imageand I just
want
> to ask whether I can determine it before the reboot.
>
> Thx,
> BBD (Big Black Dog)
> DISCLAIMER:- This email is confidential and intended only for the use
of
> the individual or entity named above and may contain information that
is
> privileged. If you are not the intended recipient, you are notified
that
> any dissemination, distribution or copying of this email is strictly
> prohibited. If you have received this email in error, please notify us
> immediately by return email or telephone and destroy the original
message.
> Thank you.
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367"Government can do something for the people only in proportion as it can do something to the people." -- Thomas Jefferson
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:49 GMT-3