OT: Multilink PPP

From: Georg Pauwen (pauwen@hotmail.com)
Date: Fri Jul 18 2003 - 09:32:25 GMT-3


Hello crew,

Cisco CCO says:

You should configure multilink PPP interleaving if you have a dialer, ISDN
PRI or BRI interface, or a virtual template, and either of the following:

Point-to-point connections using PPP encapsulation
Links slower than 2 Mbps
--------------------------------------------------------------------------------
Note Do not use multilink PPP on links faster than 2 Mbps.

What is the reason for recommending to not use PPP multilink on links faster
than 2 Mbps ?

Regards,

Georg Pauwen



This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:44 GMT-3