From: Rivalino YMT. (rivel131@cyberlib.itb.ac.id)
Date: Thu Jul 17 2003 - 03:36:29 GMT-3
This is the answer:
r1
ip pim rp-address 1.1.1.1 5
!
access-list 5 permit 224.1.1.1
access-list 5 permit 224.1.1.2
It does not need 'access-list 5 deny any'.
Thanks,
Rivalino
On Wed, 16 Jul 2003, Brown, Patrick (NSOC-OCF} wrote:
> Would the following config be enough to make sure r1 only registers with the
> RP 1.1.1.1 for multicast addresses 224.1.1.1 and 224.1.1.2?
>
> r1
> ip pim rp-address 1.1.1.1 5
>
> access-list 5 permit 224.1.1.1
> access-list 5 permit 224.1.1.2
> access-list 5 deny any
>
> or would I have to do
>
> r1
> ip pim rp-address 1.1.1.1
> ip pim accept-rp 1.1.1.1. 3 5
>
> access-list 3 permit 1.1.1.1
>
> access-list 5 permit 224.1.1.1
> access-list 5 permit 224.1.1.2
> access-list 5 deny any
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:42 GMT-3