RE: Frame Question

From: Jung, Jin (jin.jung@lmco.com)
Date: Wed Jul 16 2003 - 15:46:22 GMT-3

You can use
Clear frame-relay-in-arp command.

Jin jung...

-----Original Message-----
From: Cristian Henry H [mailto:chenry@reuna.cl]
Sent: Wednesday, July 16, 2003 2:36 PM
To: Jim Phillipo
Cc: ccielab@groupstudy.com
Subject: Re: Frame Question

Save your configuration and reload, the extra mappings would must
disappears.

Jim Phillipo ha escrito:
>
> This is the relevant part of the config:
>
> interface Serial0/0
> ip address 172.31.24.4 255.255.255.0
> encapsulation frame-relay
> ip split-horizon
> no arp frame-relay
> frame-relay map ip 172.31.24.2 401 broadcast
> frame-relay map ip 172.31.24.4 401 broadcast
> no frame-relay inverse-arp
> frame-relay lmi-type cisco
>
> I am still getting dynamic mappings and I shouldn't be. Any thoughts ?
>
> r4#sho fram
> r4#sho frame-relay map
> Serial0/0 (up): ip 172.31.24.2 dlci 401(0x191,0x6410), static,
> broadcast,
> CISCO, status defined, active
> Serial0/0 (up): ip 172.31.24.4 dlci 401(0x191,0x6410), static,
> broadcast,
> CISCO, status defined, active
> Serial0/0 (up): ip 172.31.100.5 dlci 405(0x195,0x6450), dynamic,
> broadcast,, status defined, active
> Serial0/0 (up): ip 172.31.100.6 dlci 406(0x196,0x6460), dynamic,
> broadcast,, status defined, active
>
> Jim Phillipo, CCNP, CCDP
> Sr. Internetworking Engineer
> W: 401.456.1821 F: 401.456.0599 M: 508.982.8923
> 90 Royal Little Drive, Providence, RI 02904
> www.guardent.com _____________________________________________________
> G U A R D E N T
> Security | Privacy | Data Protection
>
> ______________________________________________________________________
> _
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html 

-- 
Cristian E. Henry
REUNA

E-mail: chenry@reuna.cl
Fono: 56-2-3370336

This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:42 GMT-3