From: Jim Phillipo (jim.phillipo@guardent.com)
Date: Wed Jul 16 2003 - 15:16:08 GMT-3
This is the relevant part of the config:
interface Serial0/0
ip address 172.31.24.4 255.255.255.0
encapsulation frame-relay
ip split-horizon
no arp frame-relay
frame-relay map ip 172.31.24.2 401 broadcast
frame-relay map ip 172.31.24.4 401 broadcast
no frame-relay inverse-arp
frame-relay lmi-type cisco
I am still getting dynamic mappings and I shouldn't be. Any thoughts ?
r4#sho fram
r4#sho frame-relay map
Serial0/0 (up): ip 172.31.24.2 dlci 401(0x191,0x6410), static,
broadcast,
CISCO, status defined, active
Serial0/0 (up): ip 172.31.24.4 dlci 401(0x191,0x6410), static,
broadcast,
CISCO, status defined, active
Serial0/0 (up): ip 172.31.100.5 dlci 405(0x195,0x6450), dynamic,
broadcast,, status defined, active
Serial0/0 (up): ip 172.31.100.6 dlci 406(0x196,0x6460), dynamic,
broadcast,, status defined, active
Jim Phillipo, CCNP, CCDP
Sr. Internetworking Engineer
W: 401.456.1821 F: 401.456.0599 M: 508.982.8923
90 Royal Little Drive, Providence, RI 02904
www.guardent.com
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:41 GMT-3