From: Jason Cash (cash2001@swbell.net)
Date: Tue Jul 15 2003 - 19:04:02 GMT-3
I trying to get ISIS L2 routes into the L1 by redist. L2 into L1 which
will be adv. to R4X. As you can see I have several L2 routes:
r4#sh ip route isis
136.10.0.0/16 is variably subnetted, 8 subnets, 4 masks
i L2 136.10.2.0/24 [115/10] via 136.10.24.2, Serial0/0
i L2 136.10.1.0/24 [115/10] via 136.10.24.2, Serial0/0
i L2 136.10.12.0/24 [115/10] via 136.10.24.2, Serial0/0
i L2 136.10.25.0/30 [115/10] via 136.10.24.2, Serial0/0
Here is the config that I thought would accomplish the task:
R4
router isis
summary-address 100.10.0.0 255.255.240.0 level-1
redistribute connected level-1-2
redistribute isis ip level-2 into level-1 distribute-list 100
net 49.0042.4444.4444.4444.00
metric-style wide
set-overload-bit on-startup 600
But when I ‘sh isis route’ it is empty. Is this the command
to use to look at L1 table? I take it be by the help provided:
r4#sh isis ?
route IS-IS level-1 routing table
r4#sh isis route
IS-IS not running in OSI mode (*) (only calculating IP routes)
(*) Use "show isis topology" command to display paths to all routers
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:40 GMT-3