From: John Matijevic (matijevi@bellsouth.net)
Date: Tue Jul 08 2003 - 20:26:13 GMT-3
Hello Tim,
Then I am assuming you are referring to another post you sent (Subject: Way
to create a config file in flash?
) asking the following:
> Hey all. I'm trying to play around with Autoinstall over frame (remotely)
and would like to know if there is a way to create a dummy config file
> without loading one from a tftp server. Is there a "VI" or equivalent
in
> order to create such a file as I only have access to my terminal server
and cannot setup a tftp server from where I am.
>
> I've looked around and have been able to find such a command.
>
> Thanks.
>
> Tim
and if you search I have answered the other post as well.
Sincerely,
Matijevic
----- Original Message -----
From: "Snow, Tim" <timothy.snow@eds.com>
To: "'John Matijevic'" <matijevi@bellsouth.net>
Cc: <ccielab@groupstudy.com>
Sent: Tuesday, July 08, 2003 7:11 PM
Subject: RE: autoinstall over frame
> I'm aware of what the Autoinstall feature as it pertains to the DHCP
portion
> of it, what I was looking for is how to create a default config file that
I
> could use the DHCP server to give to the "client" router by way of the
> "bootfile filename" option under the DHCP pool.
>
> Tim
>
>
> -----Original Message-----
> From: John Matijevic [mailto:matijevi@bellsouth.net]
> Sent: Tuesday, July 08, 2003 9:36 AM
> To: nettable_walker@comcast.net; ccielab@groupstudy.com;
> timothy.snow@eds.com
> Subject: Re: autoinstall over frame
>
>
> Hello,
> The autoinstall feature allows you to automatically configure the router
> using DHCP. Take a look at the following link for more documentation:
>
http://www.cisco.com/en/US/products/sw/iosswrel/ps1834/products_feature_guid
> e09186a0080080578.html
>
> Sincerely,
> Matijevic
> ----- Original Message -----
> From: <nettable_walker@comcast.net>
> To: <matijevi@bellsouth.net>; <ccielab@groupstudy.com>;
> <timothy.snow@eds.com>
> Sent: Tuesday, July 08, 2003 9:25 AM
> Subject: autoinstall over frame
>
>
> > Professional's, I have seen quite a few comments on Group Study
> > about "autoinstall or frame"
> > What exactly is this ?
> >
> > Richard
> >
> > //
> > > Hello,
> > > I have been searching for the same thing, but could not find anything
so
> > > far...., I am sure there is an undocumented way of creating a file,
but
> that
> > > is only between the cisco developers. There is a way to create a
> directory
> > > in ios.
> > > Sincerely,
> > > Matijevic
> > > ----- Original Message -----
> > > From: "McCallum, Robert" <Robert.McCallum@let-it-be-thus.com>
> > > To: "'Snow, Tim'" <timothy.snow@eds.com>; <ccielab@groupstudy.com>
> > > Sent: Tuesday, July 08, 2003 5:03 AM
> > > Subject: RE: Way to create a config file in flash?
> > >
> > >
> > > > Not that I know of. The only way I have done it is by tftping files
> down
> > > into flash
> > > >
> > > > Robert McCallum
> > > > CCIE #8757 R&S
> > > >
> > > >
> > > > -----Original Message-----
> > > > From: Snow, Tim [mailto:timothy.snow@eds.com]
> > > > Sent: 08 July 2003 09:59
> > > > To: 'ccielab@groupstudy.com'
> > > > Subject: Way to create a config file in flash?
> > > >
> > > >
> > > > Hey all. I'm trying to play around with Autoinstall over frame
> (remotely)
> > > and would like to know if there is a way to create a dummy config file
> >
> > > > without loading one from a tftp server. Is there a "VI" or
> equivalent
> > > in
> > > > order to create such a file as I only have access to my terminal
> server
> > > and cannot setup a tftp server from where I am.
> > > >
> > > > I've looked around and have been able to find such a command.
> > > >
> > > > Thanks.
> > > >
> > > > Tim
> > > >
> > > >
> > > >
> _______________________________________________________________________
> > > > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> > > >
> > > > Subscription information may be found at:
> > > > http://www.groupstudy.com/list/CCIELab.html
> > > >
> > > >
> > > >
> _______________________________________________________________________
> > > > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> > > >
> > > > Subscription information may be found at:
> > > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> > >
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:28 GMT-3