From: Snow, Tim (timothy.snow@eds.com)
Date: Tue Jul 08 2003 - 20:11:47 GMT-3
I'm aware of what the Autoinstall feature as it pertains to the DHCP portion
of it, what I was looking for is how to create a default config file that I
could use the DHCP server to give to the "client" router by way of the
"bootfile filename" option under the DHCP pool.
Tim
-----Original Message-----
From: John Matijevic [mailto:matijevi@bellsouth.net]
Sent: Tuesday, July 08, 2003 9:36 AM
To: nettable_walker@comcast.net; ccielab@groupstudy.com;
timothy.snow@eds.com
Subject: Re: autoinstall over frame
Hello,
The autoinstall feature allows you to automatically configure the router
using DHCP. Take a look at the following link for more documentation:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1834/products_feature_guid
e09186a0080080578.html
Sincerely,
Matijevic
----- Original Message -----
From: <nettable_walker@comcast.net>
To: <matijevi@bellsouth.net>; <ccielab@groupstudy.com>;
<timothy.snow@eds.com>
Sent: Tuesday, July 08, 2003 9:25 AM
Subject: autoinstall over frame
> Professional's, I have seen quite a few comments on Group Study
> about "autoinstall or frame"
> What exactly is this ?
>
> Richard
>
> //
> > Hello,
> > I have been searching for the same thing, but could not find anything so
> > far...., I am sure there is an undocumented way of creating a file, but
that
> > is only between the cisco developers. There is a way to create a
directory
> > in ios.
> > Sincerely,
> > Matijevic
> > ----- Original Message -----
> > From: "McCallum, Robert" <Robert.McCallum@let-it-be-thus.com>
> > To: "'Snow, Tim'" <timothy.snow@eds.com>; <ccielab@groupstudy.com>
> > Sent: Tuesday, July 08, 2003 5:03 AM
> > Subject: RE: Way to create a config file in flash?
> >
> >
> > > Not that I know of. The only way I have done it is by tftping files
down
> > into flash
> > >
> > > Robert McCallum
> > > CCIE #8757 R&S
> > >
> > >
> > > -----Original Message-----
> > > From: Snow, Tim [mailto:timothy.snow@eds.com]
> > > Sent: 08 July 2003 09:59
> > > To: 'ccielab@groupstudy.com'
> > > Subject: Way to create a config file in flash?
> > >
> > >
> > > Hey all. I'm trying to play around with Autoinstall over frame
(remotely)
> > and would like to know if there is a way to create a dummy config file
>
> > > without loading one from a tftp server. Is there a "VI" or
equivalent
> > in
> > > order to create such a file as I only have access to my terminal
server
> > and cannot setup a tftp server from where I am.
> > >
> > > I've looked around and have been able to find such a command.
> > >
> > > Thanks.
> > >
> > > Tim
> > >
> > >
> > >
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:28 GMT-3