From: Michael Popovich (michael625@cox.net)
Date: Tue Jul 08 2003 - 00:19:57 GMT-3
It is my understanding that the 48k can be used for other data if unused by the LLQ traffic.
If the LLQ traffic exceeds the 48k it will not use the extra bandwidth available on the circuit. You will drop priority packets.
MP
>
> From: Tomikawa <h-tomikawa@syscomusa.com>
> Date: 2003/07/07 Mon PM 07:26:46 EDT
> To: ccielab@groupstudy.com
> Subject: priority in LLQ
>
> Hi, all.
> This is maybe already discussed, but I would like to confirm.
>
> Using "priority" command in LLQ will give a class to highest priority.
> But, what if there is no use in that class.
> Let's assume a config bellow:
> --------------------------------
> policy-map VOIP
> class voice
> priority 48
> class data
> bandwidth 64
> --------------------------------
> Here 48K is used for "priority". But, if no "class voice" is used meanwhile,
> is "48K" is still reserved for "class voice" or used for others?
>
> Thank you in advance.
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:28 GMT-3