From: Tomikawa (h-tomikawa@syscomusa.com)
Date: Mon Jul 07 2003 - 20:26:46 GMT-3
Hi, all.
This is maybe already discussed, but I would like to confirm.
Using "priority" command in LLQ will give a class to highest priority.
But, what if there is no use in that class.
Let's assume a config bellow:
--------------------------------
policy-map VOIP
class voice
priority 48
class data
bandwidth 64
--------------------------------
Here 48K is used for "priority". But, if no "class voice" is used meanwhile,
is "48K" is still reserved for "class voice" or used for others?
Thank you in advance.
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:28 GMT-3