From: Keyur Shah (kshah@hellocomputers.com)
Date: Wed Jul 02 2003 - 05:49:24 GMT-3
Azhar,
I misunderstood your post earlier.
I looked it up and found SCCP analog port carries weight of 1. So, if you
have both analog ports connected on your ATA then it will be weight of 2.
-Keyur Shah-
CCIE# 4799 (Security;R/S)
CCSI# 25047; CISSP# 28799
CCSP,CWNA,Cisco Wireless,Check Point CCSE Plus and CCSI,Solaris
SCNA,Microsoft MCSE,MCT,Novell MCNE,CNI
Hello Computers
"Say Hello to Your Future!"
http://www.hellocomputers.com
Hello Hall of Fame @
http://www.hellocomputers.com/hellofame.html
Toll-Free: 1.877.79.HELLO
-----Original Message-----
From: Keyur Shah
Sent: Wednesday, July 02, 2003 12:03 AM
To: 'Azhar Mehmood'; ccielab@groupstudy.com
Subject: RE: ATA 186/188 weight?
It must be less than one lb. Looks like small US Robotics external modem
type form factor and weight. I haven't put it on the scale though.
-Keyur Shah-
CCIE# 4799 (Security;R/S)
CCSI# 25047; CISSP# 28799
CCSP,CWNA,Cisco Wireless,Check Point CCSE Plus and CCSI,Solaris
SCNA,Microsoft MCSE,MCT,Novell MCNE,CNI Hello Computers "Say Hello to Your
Future!" http://www.hellocomputers.com Hello Hall of Fame @
http://www.hellocomputers.com/hellofame.html
Toll-Free: 1.877.79.HELLO
-----Original Message-----
From: Azhar Mehmood [mailto:azhar.mehmood@web.de]
Sent: Monday, June 30, 2003 8:53 AM
To: ccielab@groupstudy.com
Subject: ATA 186/188 weight?
Hi,
does anybody know the weight of ATA 186/188?
As an IP Phone has a weight of 1 or is 1 device unit and IP Soft Phone got a
weight of 20. I was trying to find it on cisco web but without success.
regards
Azhar Mehmood
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:19 GMT-3