From: wing_lam@jossynergy.com
Date: Wed Jul 02 2003 - 01:45:22 GMT-3
Dear Herny,
Just curios why in this case we need to add dialer map statement which is
the network (10.10.10.0/24) other than the BRI interface (10.10.12.0/24)?
Shouldn't routing will cater the reachability to 10.10.10.0?
Thx a lot,
BBD (Big Black Dog)
Cristian Henry H
<chenry@reuna.cl> To: Ram Shummoogum <rshummoo@ca.ibm.com>
Sent by: cc: ccielab@groupstudy.com
nobody@groupstudy Subject: Re: ISDN PPP Callback with Dialer Watch
.com
07/02/2003 04:12
AM
Please respond to
Cristian Henry H
Yes, you are right!, please add on r1 the following command
!
dialer map ip 10.10.10.0 name r2 broadcast 222222
!
and add also on r2 the following one:
!
dialer-list 1 protocol permit list 100
!
access-list 100 deny ospf any any
access-list 100 permit ip any any
!
Thanks
Ram Shummoogum ha escrito:
>
> I think you are missing a dialer map ip statement for the route you are
> watching.
>
> Cristian Henry H <chenry@reuna.cl>@groupstudy.com on 07/01/2003 10:16:49
AM
>
> Please respond to Cristian Henry H <chenry@reuna.cl>
>
> Sent by: nobody@groupstudy.com
>
> To: Budi Gunawan <bgunawan@hotpop.com>
> cc: CCIE Lab GroupStudy <ccielab@groupstudy.com>
> Subject: Re: ISDN PPP Callback with Dialer Watch
>
> Try with this, could works, let me know the results :
>
> Router client
> ----------------
>
> hostname r1
> !
> enable secret cisco
> !
> username r2 password cisco
> !
> int bri0/0
> ip address 10.10.12.1 255.255.255.0
> encapsulation ppp
> ip ospf cost 9000
> isdn switch-type xxxx
> dialer idle-timout 20
> dialer-group 1
> dialer wait-for-carrier 4
> dialer watch-group 1
> ppp callback request
> dialer map ip 10.10.12.2 name r2 broadcast 222222
> ppp authentication chap
> !
> dialer-list 1 protocol ip permit list 100
> !
> dialer watch-list 1 permit 10.10.10.0 255.255.255.0
> !
> access-list 100 deny ospf any any
> access-list 100 permit ip any any
> !
>
> Router server
> -------------
>
> hostname r2
> !
> enable secret cisco
> !
> username r1 password cisco
> !
> int bri0/0
> ip address 10.10.12.2 255.255.255.0
> encapsulation ppp
> ip ospf cost 9000
> isdn switch-type xxxx
> dialer-group 1
> dialer callback-secure
> dialer enable-timeout 2
> dialer idle timeout 0
> dialer map ip 10.10.12.1 name r1 class callback broadcast 111111
> ppp authentication chap
> ppp callback accept
> !
> dialer-list 1 protocol ip permit
> !
> map-class dialer callback
> dialer callback-server username
> !
>
> Budi Gunawan ha escrito:
> >
> > Hi All,
> >
> > Could we make ISDN callback with Dialer watch?
> > If we could, how to configure it?
> >
> > Thanks and regards,
> > BG.
> >
> > _______________________________________________________________________
> > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> --
> Cristian E. Henry
> REUNA
>
> E-mail: chenry@reuna.cl
> Fono: 56-2-3370336
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
-- Cristian E. Henry REUNAE-mail: chenry@reuna.cl Fono: 56-2-3370336
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:18 GMT-3