Re: Help with Delete FLASH command!

From: wing_lam@jossynergy.com
Date: Sat Jun 28 2003 - 07:05:02 GMT-3

Hi, Hossam,

It's strange that the command annot be show but I can do it as following:

R26#s?
*s=show send setup show slip
squeeze start-chat systat

Anyway, can you try type the whole command to see whether it can be
executed.

If this cannot be done, I think you can:

i) Backup the "c2600-ik2o3s-mz.121-16.bin" by tftp first
ii) reboot, it will release the deleted spaces.

Thx,
BBD (Big Black Dog)

                                                                                                                                       
                      Hossam
                      <sam6626@yahoo.co To: wing_lam@jossynergy.com
                      m> cc: ccielab@groupstudy.com
                                               Subject: Re: Help with Delete FLASH command!
                      06/28/2003 05:27
                      PM
                                                                                                                                       
                                                                                                                                       

Hi BBD,
Thanks. But my IOS (C2600-IK2O3S-M), Version 12.1(16) is not supporting
this squeeze comand.

Router2#s?
*s=show sdlc send setup show
slip start-chat systat
Did it replace any other command?? I looked in 12.1 doc and came with
nothing??

Thanks
SAM

wing_lam@jossynergy.com wrote:

 Hi, Hossam,

 You have to squeeze the flash before deleted space can be used.

 command "squeeze flash:"

 Thx,
 BBD (Big Black Dog)

 Hossam
 m> cc:
 Sent by: Subject: Help with Delete FLASH command!
 nobody@groupstudy
 .com

 06/28/2003 04:55
 PM
 Please respond to
 Hossam

 Hi team,
 i have a situation where i have two files on my 2620 flash memory.

 Router2#sh flash
 System flash directory:
 File Length Name/status
 1 8530560 c2600-ik2o3s-mz.121-16.bin
 2 6317056 c2600-js-mz.120-26.bin
 [14847744 bytes used, 1929472 available, 16777216 total]
 16384K bytes of processor board System flash (Read/Write)

 Now i need to delet "file 2" and upload another file instead. My problem
 is
 that i do't want to l! oose file 1. So i can't erase flash.

 I tried to use Delete filename with its to options "/fore /recuring". But
 i
 never managed to totaly delete the file.

 After issuing the delete command i stay with:

 Router2#sh flash
 System flash directory:
 File Length Name/status
 1 8530560 c2600-ik2o3s-mz.121-16.bin
 2 6317056 c2600-js-mz.120-26.bin (Deleted)
 [14847744 bytes used, 1929472 available, 16777216 total]
 16384K bytes of processor board System flash (Read/Write)

 File 2 stays with the deleted taged!!! But the flash is not freee to place
 another files!!!
 I tried to upload another file to the flash but it gets back with error
 message "No enough space".

 Is there any way to get rid of the deleted file without erasing all
 FLASH??

 Thanks alot
 Hossam

 ---------------------------------
 Do you Yahoo!?
 SBC Yahoo! DSL - Now only $29.95 per month!

 _______________________________________________________________________
 You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.

 Subscription information may be found at:
 http://www.groupstudy.com/list/CCIELab.html

Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!

This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:13 GMT-3