From: Jonathan V Hays (jhays@jtan.com)
Date: Fri Jun 27 2003 - 13:02:33 GMT-3
It could be a simple typo. It could be anything.
Please post your configurations, so we'll have something to work with.
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf Of Michael Needham (mineedha)
> Sent: Thursday, June 26, 2003 10:25 PM
> To: ccielab@groupstudy.com
> Subject: NSSA Routes will not propigate into rest of OSPF network....
>
>
> Here is the strip off the routers.. They are 2500's running
> 12.1(17)....
> Strange eh? fairly simple config.... Yet I cannot get the
> TYPE 7's to
> become TYPE 5 and propagate.... Any ideas?
>
>
>
> Actually the ABR only sees the redistributed routes as Type 7
> in the ip
> ospf data... It does not show type 5.. Hmmmmm... Hence why I
> do not see
> them in the rest of the network but, why is this the case?
>
> -----Original Message-----
> From: discuss-it-admin@lists.netmasterclass.net
> [mailto:discuss-it-admin@lists.netmasterclass.net] On Behalf
> Of Michael
> Needham (mineedha)
> Sent: Thursday, June 26, 2003 3:09 PM
> To: 'NetMasterClass'
> Subject: [discuss-it]NSSA Routes will not propigate into rest of OSPF
> network....
>
>
> Very simple set up propigating EIGRP routes (redist. on NSSA
> remote) to
> ABR... The ABR sees all of the NSSA routes but will not propagate them
> into the rest of the OSPF areas... Any ideas?
>
> [GroupStudy removed an attachment of type
> application/octet-stream which had a name of router.dat]
>
>
> ______________________________________________________________
> _________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:12 GMT-3