From: Hunt Lee (huntl@webcentral.com.au)
Date: Fri Jun 27 2003 - 00:01:37 GMT-3
Hello,
I don't understand why... as soon as I tried to apply the config below, it
doesn't do anything on the interface.
policy-map gw1wic-child
class platinum
priority 10000
set ip precedence 5
class nonvoice
bandwidth 90000
policy-map gw1wic-out
class class-default
shape average 100000000
service-policy gw1wic-child
!
class-map match-any platinum
match access-group 111
match ip rtp 16384 16383
class-map match-any nonvoice
match access-group 112
!
cbwfq.wic(config-if)#service-policy output gw1wic-out
cbwfq.wic#sh run int fa0/0
Building configuration...
Current configuration : 310 bytes
!
interface FastEthernet0/0
description mls2.wic fa2-17
ip address 203.147.131.10 255.255.255.252
no ip redirects
no ip proxy-arp
ip accounting access-violations
ip nat outside
ip route-cache flow
ip ospf message-digest-key 1 md5 7 0205534119541C14644F
no ip mroute-cache
speed 100
full-duplex
end
... the service policy command didn't go in at all???
Regards,
Hunt
-- WebCentral Pty Ltd Australia's #1 Internet Web Hosting Company Level 1, 96 Lytton Road. Network Operations - Systems Engineer PO Box 4169, East Brisbane. email: huntl@webcentral.com.au Queensland, Australia. phone: +61 7 3249 2553
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:12 GMT-3