From: Jonathan V Hays (jhays@jtan.com)
Date: Thu Jun 26 2003 - 18:07:16 GMT-3
I've configured "ip ospf demand-circuit" recently both with legacy DDR
and dialer profiles and it worked fine, without any problems, either
way. Please post your configurations, with and without dialer profiles,
and maybe we can see what you have been doing wrong.
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf Of Peng Zheng
> Sent: Thursday, June 26, 2003 4:26 PM
> To: ccielab@groupstudy.com
> Subject: ip ospf demand-circuit under interface dialer 0 doesn't work
>
>
> I have two routers, r3 and r4. If I do not use dialer
> interface on both them, ip ospf demand-circuit works
> well. But if I user dialer profile on r3, After a
> while, it bring up the link because ospf from init to
> down.
> How can I config ip ospf demand-circuit with dialer
> profile?
>
> Thanks.
>
> __________________________________
> Do you Yahoo!?
> SBC Yahoo! DSL - Now only $29.95 per month!
> http://sbc.yahoo.com
>
>
> ______________________________________________________________
> _________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:11 GMT-3