From: Aamer Kaleem (kaleemaamer@yahoo.com)
Date: Thu Jun 26 2003 - 12:41:46 GMT-3
Yes, as i am seeing output drops:
r1#sh int atm 10/0/0 | i Input
Input queue: 0/75/0/0 (size/max/drops/flushes);
Total output drops: 3210821
Thanks,
Aamer
--- Tony Schaffran <tschaffran@cconlinelabs.com>
wrote:
> Do you have enough traffic to cause shaping to be
> active?
>
> Tony Schaffran
> Network Analyst
> CCIE #11071
> CCNP, CCNA, CCDA
> NNCDS, NNCSS, CNE, MCSE
>
> http://www.cconlinelabs.com/
> Your #1 choice for online cisco rack rentals.
>
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of
> Aamer Kaleem
> Sent: Thursday, June 26, 2003 8:29 AM
> To: ccielab@groupstudy.com
> Subject: how to verify that shaping is enabled on an
> ATM interface
>
> Hi,
>
> Here are my configs for atm interface:
>
> r1#sh runn int atm 10/0/0
> Building configuration...
>
> Current configuration : 187 bytes
> !
> interface ATM10/0/0
> bandwidth 150000
> no ip address
> ip route-cache flow
> load-interval 30
> no atm sonet ilmi-keepalive
> no atm ilmi-keepalive
> end
>
> r1#sh runn int atm 10/0/0.1
> Building configuration...
>
> Current configuration : 289 bytes
> !
> interface ATM10/0/0.1 point-to-point
> mtu 1600
> bandwidth 30000
> ip address 10.1.1.1 255.255.255.252
> ip pim query-interval 3
> ip pim sparse-mode
> ip ospf cost 425
> pvc 0/62
> vbr-nrt 30000 30000
> oam-pvc manage
> !
> end
>
> When I do show int atm 10/0/0(or .1) shape, it does
> not give me any thing.
>
> show atm vc int atm detail command also just show
> configured service, how to verify that traffic
> shaping
> is being done. I mean like in FR we see it thru show
> traffic-shape command.
>
> Thank you,
>
> Aamer
>
> __________________________________
> Do you Yahoo!?
> SBC Yahoo! DSL - Now only $29.95 per month!
> http://sbc.yahoo.com
>
>
>
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:10 GMT-3