From: Aamer Kaleem (kaleemaamer@yahoo.com)
Date: Thu Jun 26 2003 - 12:29:19 GMT-3
Hi,
Here are my configs for atm interface:
r1#sh runn int atm 10/0/0
Building configuration...
Current configuration : 187 bytes
!
interface ATM10/0/0
bandwidth 150000
no ip address
ip route-cache flow
load-interval 30
no atm sonet ilmi-keepalive
no atm ilmi-keepalive
end
r1#sh runn int atm 10/0/0.1
Building configuration...
Current configuration : 289 bytes
!
interface ATM10/0/0.1 point-to-point
mtu 1600
bandwidth 30000
ip address 10.1.1.1 255.255.255.252
ip pim query-interval 3
ip pim sparse-mode
ip ospf cost 425
pvc 0/62
vbr-nrt 30000 30000
oam-pvc manage
!
end
When I do show int atm 10/0/0(or .1) shape, it does
not give me any thing.
show atm vc int atm detail command also just show
configured service, how to verify that traffic shaping
is being done. I mean like in FR we see it thru show
traffic-shape command.
Thank you,
Aamer
__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:10 GMT-3