From: sadame@unitel.co.kr
Date: Thu Jun 26 2003 - 10:25:15 GMT-3
hi there & daniel
your concern was solved at groupstudy mailing-list by someone,, I cann't remember who..
the key command is "h323-gateway voip bind srcaddr <ip_address>" that is interface command
for example
lo0 172.16.2.1 R1 e1(10.1.1.1) -------------------- e2(10.1.1.2) R2 lo0 172.16.1.1
the configure on R1 is as following
!
R1
!
interface loopback 0
ip address 172.16.2.1 255.255.255.0
h323-gateway voip bind srcaddr 172.16.2.1 -> interface command
!
dial-peer voice 11 pots
destination-pattern 1111...
port 1/0/0
!
dial-peer voice 22 voip
destination-pattern 2222...
session target ipv4:172.16.1.1
ip preference 5
!
you can find the way to solve your concern...
R2> show call active voice 8m7I=C
onnectionId[0x65B8E25C 0x14F211CC 0x8024B9BB 0xB6B4DD0A]
IncomingConnectionId[0x65B8E25C 0x14F211CC 0x8024B9BB 0xB6B4DD0A]
RemoteIPAddress=172.16.2.1 --> this ip address is the loopback of R1
RemoteUDPPort=17272
RemoteSignallingIPAddress=137.12.22.2 --> this ip address is the loopback of R1
RemoteSignallingPort=1720
RemoteMediaIPAddress=137.12.22.2 --> this ip address is the loopback of R1
RemoteMediaPort=17272
RoundTripDelay=0 ms
SelectedQoS=best-effort
tx_DtmfRelay=inband-voice
FastConnect=TRUE ..
search the document on the CD-ROM or WEB for more detail of this command..
you know this way is very effective for VOIPsession sustenance even if the link-fail occurs..
but you must have redundancy-path
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:10 GMT-3