From: Lord, Chris (chris.lord@lorien.co.uk)
Date: Mon Jun 23 2003 - 22:07:11 GMT-3
Hi
I have two Cat 3550 EMI switches connected together via ports f0/47 and f0/48 using the following config on each port:
switchport trunk encaps dot1q
switchport trunk native vlan 999
switchport trunk pruning vlan 10,20,30,40,55,70,100
switchport mode trunk
no ip address
udld aggressive
channel-group 1 mode desirable
This creates an interface Port-channel1 for me automatically. Do I have to apply the encaps, native vlan and pruning config to the Port-channel1 interface in addition to the physical interfaces? If so why?
Any offers?? Thx,
Chris.
**********************************************************************
The information contained in this email is confidential and is intended for the recipient only. If you have received it in error, please notify us immediately by reply email and then delete it from your system. Please do not copy it or use it for any purposes, or disclose its contents to any other person or store or copy this information in any medium. The views contained in this email are those of the author and not necessarily those of Lorien plc.
Thank you for your co-operation.
**********************************************************************
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:08 GMT-3