From: wing_lam@jossynergy.com
Date: Sat Jun 21 2003 - 23:48:53 GMT-3
Hi,
I get into the engineering mode just want to test the Giga module, as it's
so strange that some ports on it keep up and down, but resumes stable for a
while. I opened case to Cisco several times about this but cannot solve the
problem.
Heard from my friend that this mode can test the module and some other
diagnostic commands. But the access mode depends on different platform.
Thx,
BBD (Big Black Dog)
<boby2kusa@hotmai
l.com> To: <wing_lam@jossynergy.com>, <ccielab@groupstudy.com>
Sent by: cc:
nobody@groupstudy Subject: Re: Engineering mode
.com
06/20/2003 01:35
AM
Please respond to
boby2kusa
What do you need to get into engineering mode for? Most of the command
available are available in
non-engineering mode. Those that are not you will not to contact TAC
anyway
for them to make sense of it.
----- Original Message -----
From: <wing_lam@jossynergy.com>
To: <ccielab@groupstudy.com>
Sent: Friday, June 20, 2003 7:17 AM
Subject: Engineering mode
> Hi, group;
>
> Just want to know how can I get into the engineer mode of the 6509
switch,
> my model is MSFC 2 with Sup 1A.
>
> Thx,
> BBD (Big Black Dog)
> DISCLAIMER:- This email is confidential and intended only for the use of
> the individual or entity named above and may contain information that is
> privileged. If you are not the intended recipient, you are notified that
> any dissemination, distribution or copying of this email is strictly
> prohibited. If you have received this email in error, please notify us
> immediately by return email or telephone and destroy the original
message.
> Thank you.
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:02 GMT-3