From: yuki hisano (yukyhisano@hotmail.com)
Date: Thu Jun 19 2003 - 20:05:59 GMT-3
I will check that. Thanks!
Yuki
>From: Jay Hennigan <jay@west.net>
>To: Yuki Hisano <yukyhisano@hotmail.com>
>CC: ccielab@groupstudy.com
>Subject: Re: Line Protocol down
>Date: Thu, 19 Jun 2003 15:34:57 -0700 (PDT)
>
>On Thu, 19 Jun 2003, Yuki Hisano wrote:
>
> > Group,
> >
> > I am having a trouble with this!!connection. R1------------R2 simple
> > serial connection with HDLC.
> > This connection is bouncing for no reason as far as I can tell. The
>status of
> > the interfaces are
> > Interface UP and Line Protocol DOWN. Line Protocol is going UP and DOWN
> > causing this to be bouncing.
> > I checked DSUs and the circuit is clean. There is no traffic coming in
>and out
> > both ways.
> > This happened before and I never figured why.
> >
> > Anybody has any idea?
>
>Is one CSU set for internal clock, and the other set for line (or network)
>clock? It should be. It doesn't matter which one, but one should be
>internal and the other line.
>
>--
>Jay Hennigan - CCIE #7880 - Network Administration - jay@west.net
>WestNet: Connecting you to the planet. 805 884-6323 WB6RDV
>NetLojix Communications, Inc. - http://www.netlojix.com/
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:01 GMT-3