From: Michael J. Doherty (Z0rand3r@hotmail.com)
Date: Fri Jun 13 2003 - 20:33:44 GMT-3
Sounds like either the memory boards themselves were fried, or the mainboard
has a couple of circuits on the memory backplane that got burned. Try
replacing the memory chips with the ones from a different, known-good router
and see if it comes up. If it does, replace the memory boards. If it does
not, you will need to replace the router, unless you have SmartNET on it.
Mike
----- Original Message -----
From: <Catcat2608@aol.com>
To: <ccielab@groupstudy.com>
Sent: Friday, June 13, 2003 17:10
Subject: 2621 router hardware crash
> Dear group,
>
> My 2621 fast Ethernet router seemed to have crashed on me. Last night
there
> was a thuner storm and my rack was on. This morning I turned my rack on
and
> the 2621 output looked like this
>
> -----------------------------
> ERROR: No system memory detected
> System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
> Copyright (c) 2000 by cisco Systems, Inc.
>
> ERROR: No system memory detected
>
> -----------------------------
>
> The router would go no further and I could not go into ROM monitor mode
via
> the ctrl- break key. I opened the box took the memory out and put it
back - I
> have two 32MB cards. I turned the router on and I still got the same
problem.
> All my other routers are working fine. Do you have any idea as to what the
> problem is.
>
> Please advise
>
> Thanks
>
> Lou
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:58 GMT-3