From: SHARMA,MOHIT (HP-Germany,ex1) (mohit.sharma@hp.com)
Date: Fri Jun 13 2003 - 15:11:01 GMT-3
HI All,
ON the cco I found this-
Recomendation 1: Use snmp-server view Commands
To avoid performance issues, force the router to prematurely end queries for
the route table from the network management system server. Configure the
router to respond with a complete message as soon as it receives the start
of a request for the route table, as follows:
snmp-server view cutdown internet included
snmp-server view cutdown ipRouteTable excluded
snmp-server view cutdown ipNetToMediaTable excluded
snmp-server view cutdown at excluded
snmp-server view cutdown 1.3.6.1.6.3.15 excluded
snmp-server view cutdown 1.3.6.1.6.3.16 excluded
snmp-server view cutdown 1.3.6.1.6.3.18 excluded
snmp-server community public view cutdown RO
snmp-server community private view cutdown RW
I am not able to understand the use of excluded keywords. AS cisco says-
This configuration blocks requests to retrieve the route table
(ipRouteTable) and the Address Resolution Protocol (ARP) table
(ipNetToMediaTable), but allows all other requests through. ""
If excluding is to disallow it, what does "internet" keyword specify?why do
we include this?
Also a point of confusion is dt"and all the other MIB vlaues. Are these
standard?
Thanks as always for your vlauable inputs.
Smiles,
Mohit____________________________________________________________________
****** _/ ****** | Mohit Sharma
***** _/ ***** | Network Operations Engineer
**** _/_/_/ _/_/_/ **** | HP Operations
**** _/ _/ _/ _/ **** |
**** _/ _/ _/_/_/ **** |
***** _/ ***** |
****** ******* | email: mohit_sharma@hp.com
|
i n v e n t |
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:58 GMT-3