From: SHARMA,MOHIT (HP-Germany,ex1) (mohit.sharma@hp.com)
Date: Fri Jun 13 2003 - 15:06:38 GMT-3
HI,
YUps I did, but it did not help in my scenario, please read below.
Thanks,
MOhit.
-----Original Message-----
From: Jonathan V Hays [mailto:jhays@jtan.com]
Sent: Friday, June 13, 2003 8:02 PM
To: 'SHARMA,MOHIT (HP-Germany,ex1)'; 'Group'
Subject: RE: PIM sparse-dense mode
Have you read this?
http://www.cisco.com/univercd/cc/td/doc/cisintwk/intsolns/mcst_sol/frm_r
lay.htm#xtocid6
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf Of SHARMA,MOHIT (HP-Germany,ex1)
> Sent: Friday, June 13, 2003 12:10 PM
> To: 'Group'
> Subject: RE: PIM sparse-dense mode
>
>
> Hi All,
>
> Could someone please provide me a little bit more info about
> running auto-rp
> over Frame-relay, the cco is not so clear about this.
>
> Thanks,
>
> Mohit.
>
> -----Original Message-----
> From: SHARMA,MOHIT (HP-Germany,ex1) [mailto:mohit.sharma@hp.com]
> Sent: Thursday, June 12, 2003 12:28 PM
> To: 'ccielab@groupstudy.com'
> Subject: PIM sparse-dense mode
>
>
> HI All,
>
> In my lab i see a strange behaviour while running PIM
> sparse-dense mode with
> Auto-RP.
>
> The lab setup is something like this-
>
>
>
>
>
>
> R4----Ethernet----R1-------FR---------R2
>
> R1 is the rp and the mapping agent..
> The problem is that if I make R1 join some igmp groups on e1,
> it announces
> this groups out just e0 which is connected to R4 and does not
> announce it
> out to R2. Initially I thought that to see these groups in
> the mroute R2
> should also join these groups, however that is not the case
> with R4, he sees
> all these groups by just enabling pim on the right interfaces.
> Also in the mroute I can see on R1 that the forwarding
> interfaces is only
> the ethernet interfaces and not the serial interfaces.
>
> I also tried using pim nbma mode for the fr interfaces but didnt help.
>
> Any suggestions, Please help.
>
> Thanks as always.
>
> Smiles,
>
> Mohit.
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:58 GMT-3