From: Brian McGahan (brian@cyscoexpert.com)
Date: Thu Jun 12 2003 - 02:10:00 GMT-3
Richard,
Does your switch have a static route for your NSAP address? One
of the functions of ILMI is NSAP address registration between the switch
and end node. For more info:
http://www.cisco.com/warp/public/121/svcno_ilmi_7229.html
To apply a service class to a CLIP SVC, apply an ATM vc-class to
the interface.
Vc-class atm SERVICE_CLASS
Ubr+ 10000 5000
!
int atm0/0
class-int SERVICE_CLASS
HTH
Brian McGahan, CCIE #8593
Director of Design and Implementation
brian@cyscoexpert.com
CyscoExpert Corporation
Internetwork Consulting & Training
Toll Free: 866-CyscoXP
Outside US: 847.674.3392
Fax: 847.674.2625
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Richard Davidson
> Sent: Wednesday, June 11, 2003 10:28 PM
> To: groupstudy
> Subject: CLIP SVC to work with out ILMI 0/16
>
> Hello,
> I hope some one can help me with this. I am trying to
> get clip SVC to work with out ILMI. This is the
> config I have and it's just not working. one other
> thing. How do you assign a traffic rate (UBR,UBR+) to
> a all dynamic SVCs. I know the method that uses an
> nsap map:
> svc nsap 47.00918100000000E01E797201.444444444444.14
> ubr 10000
> Thanks Rich
>
> *********
> R13
> interface ATM2/0
> ip address 10.1.1.13 255.255.255.0
> atm nsap-address
> 47.00918100000000E01E797201.333333333333.13
> no atm ilmi-keepalive
> atm arp-server nsap
> 47.00918100000000E01E797201.444444444444.14
> pvc 0/5 qsaal
> ******
> R14
> interface ATM2/0
> ip address 10.1.1.14 255.255.255.0
> no ip directed-broadcast
> atm nsap-address
> 47.00918100000000E01E797201.444444444444.14
> no atm ilmi-keepalive
> atm arp-server self
> pvc 0/5 qsaal
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:56 GMT-3