CLIP SVC to work with out ILMI 0/16

From: Richard Davidson (rich@myhomemail.net)
Date: Thu Jun 12 2003 - 00:28:21 GMT-3

• Next message: Biondino, Joseph: "RE: BGP AS-Path filtering"
• Previous message: Howard C. Berkowitz: "Re: OSPF partitioning issue"
• Next in thread: Brian McGahan: "RE: CLIP SVC to work with out ILMI 0/16"
• Maybe reply: Brian McGahan: "RE: CLIP SVC to work with out ILMI 0/16"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello,
I hope some one can help me with this. I am trying to
get clip SVC to work with out ILMI. This is the
config I have and it's just not working. one other
thing. How do you assign a traffic rate (UBR,UBR+) to
a all dynamic SVCs. I know the method that uses an
nsap map:
svc nsap 47.00918100000000E01E797201.444444444444.14
 ubr 10000
Thanks Rich

*********
R13
interface ATM2/0
 ip address 10.1.1.13 255.255.255.0
 atm nsap-address
47.00918100000000E01E797201.333333333333.13
 no atm ilmi-keepalive
 atm arp-server nsap
47.00918100000000E01E797201.444444444444.14
 pvc 0/5 qsaal
******
R14
interface ATM2/0
 ip address 10.1.1.14 255.255.255.0
 no ip directed-broadcast
 atm nsap-address
47.00918100000000E01E797201.444444444444.14
 no atm ilmi-keepalive
 atm arp-server self
 pvc 0/5 qsaal

• Next message: Biondino, Joseph: "RE: BGP AS-Path filtering"
• Previous message: Howard C. Berkowitz: "Re: OSPF partitioning issue"
• Next in thread: Brian McGahan: "RE: CLIP SVC to work with out ILMI 0/16"
• Maybe reply: Brian McGahan: "RE: CLIP SVC to work with out ILMI 0/16"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:56 GMT-3