From: Pat Cunningham (pacunnin@cisco.com)
Date: Wed Jun 11 2003 - 17:30:22 GMT-3
You can copy to sup-slot0: but you can not run the dir command. Do the dir
from the supervisor.
-Pat
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Jung, Jin
Sent: Wednesday, June 11, 2003 2:19 PM
To: 'David Prall'; Jung, Jin; 'Group'
Subject: RE: 6500 MSFC slot0:
Not yet working ,
r1#dir slot0:
^
% Invalid input detected at '^' marker.
r1#dir sup-slot0:
%Error opening sup-slot0:/ (Invalid argument)
-----Original Message-----
From: David Prall [mailto:dcp@dcptech.com]
Sent: Wednesday, June 11, 2003 12:50 PM
To: 'Jung, Jin'; 'Group'
Subject: RE: 6500 MSFC slot0:
nobody@groupstudy.com <mailto:nobody@groupstudy.com> wrote:
> I came across this minor problem and could not find documentations.
>
> I have MSFC1 and SUP1 for 6500..
>
> And was trying to access the flash slot0: from MSFC so I can use the
> slot0: as backup.
>
> But I was not able to access the slot0: , and slot0: does not show up
> as flash device.
>
> I am able to access slot0: from sup1 module without any problem.
>
> Is there a special command that I can use to get access to slot0:
>
It needs to be accessed as sup-slot0:
David
-- David C Prall dcp@dcptech.com http://dcp.dcptech.com
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:56 GMT-3