From: FELICEAR@sbcglobal.net
Date: Wed Jun 11 2003 - 20:11:41 GMT-3
The MSFCs in the 6500s can be kind of tweaky depending
on which code you are running...especially weird when
running native. Try pulling the other MSFC out of the
slot...
--- Original Message ---
From: "Pat Cunningham" <pacunnin@cisco.com>
To: "Jung, Jin" <jin.jung@lmco.com>, "'David Prall'"
<dcp@dcptech.com>, "'Group'" <ccielab@groupstudy.com>
Subject: RE: 6500 MSFC slot0:
>You can copy to sup-slot0: but you can not run the
dir command. Do the dir
>from the supervisor.
>
>-Pat
>
>-----Original Message-----
>From: nobody@groupstudy.com
[mailto:nobody@groupstudy.com]On Behalf Of
>Jung, Jin
>Sent: Wednesday, June 11, 2003 2:19 PM
>To: 'David Prall'; Jung, Jin; 'Group'
>Subject: RE: 6500 MSFC slot0:
>
>
>Not yet working ,
>
>
>
>r1#dir slot0:
> ^
>% Invalid input detected at '^' marker.
>
>r1#dir sup-slot0:
>%Error opening sup-slot0:/ (Invalid argument)
>
>
>-----Original Message-----
>From: David Prall [mailto:dcp@dcptech.com]
>Sent: Wednesday, June 11, 2003 12:50 PM
>To: 'Jung, Jin'; 'Group'
>Subject: RE: 6500 MSFC slot0:
>
>
>nobody@groupstudy.com <mailto:nobody@groupstudy.com>
wrote:
>> I came across this minor problem and could not find
documentations.
>>
>> I have MSFC1 and SUP1 for 6500..
>>
>> And was trying to access the flash slot0: from MSFC
so I can use the
>> slot0: as backup.
>>
>> But I was not able to access the slot0: , and
slot0: does not show up
>> as flash device.
>>
>> I am able to access slot0: from sup1 module without
any problem.
>>
>> Is there a special command that I can use to get
access to slot0:
>>
>
>It needs to be accessed as sup-slot0:
>
>David
>--
>David C Prall dcp@dcptech.com http://dcp.dcptech.com
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:56 GMT-3