From: MADMAN (dave@interprise.com)
Date: Wed Jun 11 2003 - 17:37:39 GMT-3
Jung, Jin wrote:
> Not yet working ,
>
>
>
> r1#dir slot0:
> ^
> % Invalid input detected at '^' marker.
>
> r1#dir sup-slot0:
> %Error opening sup-slot0:/ (Invalid argument)
And it won't if you are trying from the MSFC, see my earlier posts...
Dave
>
>
> -----Original Message-----
> From: David Prall [mailto:dcp@dcptech.com]
> Sent: Wednesday, June 11, 2003 12:50 PM
> To: 'Jung, Jin'; 'Group'
> Subject: RE: 6500 MSFC slot0:
>
>
> nobody@groupstudy.com <mailto:nobody@groupstudy.com> wrote:
>
>>I came across this minor problem and could not find documentations.
>>
>>I have MSFC1 and SUP1 for 6500..
>>
>>And was trying to access the flash slot0: from MSFC so I can use the
>>slot0: as backup.
>>
>>But I was not able to access the slot0: , and slot0: does not show up
>>as flash device.
>>
>>I am able to access slot0: from sup1 module without any problem.
>>
>>Is there a special command that I can use to get access to slot0:
>>
>
>
> It needs to be accessed as sup-slot0:
>
> David
> --
> David C Prall dcp@dcptech.com http://dcp.dcptech.com
>
>
-- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367"Government can do something for the people only in proportion as it can do something to the people." -- Thomas Jefferson
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:56 GMT-3