From: Castelino, Flavian (Flavian.Castelino@nexinnovations.com)
Date: Tue Jun 10 2003 - 10:37:26 GMT-3
Emad,
U will need layer 3 vlan interfaces on ur backbone switch corresponding
to the vlans on your edge switches, a ip helper-address command on each
layer 3 interface pointing to your DHCP server.
Flavian
-----Original Message-----
From: Emad [mailto:emad@zakq8.com]
Sent: Monday, June 09, 2003 2:27 PM
To: CCIE LAB (E-mail)
Subject: switching::DHCP pool choice
Folks,
I have a question here about certain case:
I have backbone switch connected to multiple edge switches , and I need
to have different VLANs , each connected to one edge switch , I
configured DHCP server with multiple subnets range , each switch has one
vlan with only one subnet , the question is, considering the backbone is
their gateway , how can I force each edge switch to have certain subnet
from the DHCP range , if it is possible , from backbone or from the edge
switches themselves!! Thanx in advance
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:56 GMT-3