From: kurt (kurt@cybernex.net)
Date: Wed Jun 04 2003 - 12:23:02 GMT-3
hi,
have two msfc's which have previously been configured for hsrp multiple vlans
in the default group.
i have heard and have seen some unclear information about configuring hsrp
with a group# = to
the vlan.
i the past during a failover event i have seen "duplicate address" messages.
i had seen information of this, but it mostly related to non-cisco hsrp
devices.
this months packet had a brief question about this.
anyone know of any specific documentation related to this ?
also i tryed to add somthing like
interface Vlan10
description vlan10
ip address 172.16.10.2 255.255.255.0
ip helper-address xxx
ip helper-address xxx
no ip redirects
no ip mroute-cache
standby 10 priority 105 preempt
standby 10 ip 172.16.10.1
it seems to keep the group0 entry ?
how do i get rid of it in order to get it to use the group xxx entry ?
do i have to shut - no shut the interface ?
reload the router ?
remove and re-add the vlan int ?
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:52 GMT-3