From: Jonathan V Hays (jhays@jtan.com)
Date: Wed Jun 04 2003 - 11:42:32 GMT-3
The commands "ip default-gateway", "ip default-network", and "ip route
0.0.0.0 0.0.0.0" are NOT identical. I strongly suggest you read this:
http://www.cisco.com/warp/public/105/default.html
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf Of Mhlanga Libone
> Sent: Wednesday, June 04, 2003 3:40 AM
> To: 'Larson, Chris'
> Cc: 'ccielab@groupstudy.com'
> Subject: RE: 4506 on 12.1(12c)EW - mgmt interface ??
>
>
> Doh !!! It turns out the switch needed "ip route 0/0" rather
> than the "ip
> default-gateway" command that I had used !!
> I really cannot believe that !! so whats the "ip d/gway"
> command for then
> ???
>
> -----Original Message-----
> From: Larson, Chris [mailto:CLarson@usaid.gov]
> Sent: 03 June 2003 20:02
> To: Mhlanga Libone
> Subject: RE: 4506 on 12.1(12c)EW - mgmt interface ??
>
>
> I cannot offer any advice or anything except to say that
> about 2 weeks ago I
> installed 5 4507R's and 2 6500 Core's and the Vlan chosen for
> manageing
> switch devices was 192. I did not have to do anything special
> except to
> configure an SVI on each switch and give it an IP in the
> proper subnet wih a
> default route back to core. We did not have any ports in the
> 192 Vlan on the
> 4507 switches. We did have sc0 in the closets assigned to
> Vlan 192, but no
> ports on the 4507(running native).
>
> It sounds like the exact same config you have. Although, I do
> believe I
> shutdown any Vlan 1 interfaces and cleared vlan 1 from all
> the trunks, or at
> least only allowed vlan 2 - xxxx across the trunks. Don't
> know if this helps
> at all, but I wanted to let you know it sounds like we did
> the same thing
> without issue. If your Vlan 1 is up maybe trying shutting it,
> but I do not
> think that should matter.
>
>
>
>
> > -----Original Message-----
> > From: Mhlanga Libone [SMTP:libone.mhlanga@nhsia.nhs.uk]
> > Sent: Tuesday, June 03, 2003 1:01 PM
> > To: ccielab@groupstudy.com
> > Subject: 4506 on 12.1(12c)EW - mgmt interface ??
> >
> > For the life of me I CANNOT find any way of configuring the
> mgmt interface
> > on any vlan other than vlan 1.
> >
> > Documentation says you can put the management interface in
> any vlan as
> > long
> > as there are access ports in that vlan. So I tried putting
> it in vlan 17
> > as
> > I have 42 devices in that vlan ....then put a default route
> pointing to
> > the
> > msfc with trunking between the two....still no joy.
> Although I can reach
> > the
> > 4506 by first hoping onto the msfc but no access from
> anywhere else. The
> > attached hosts are fine they can talk to anything ..its
> just the switch
> > mgmt....why get rid of CatOS I ask ??
> > This e-mail is confidential and privileged. If you are not
> the intended
> > recipient please accept our apologies; please do not
> disclose, copy or
> > distribute information in this e-mail or take any action in
> reliance on
> > its
> > contents: to do so is strictly prohibited and may be
> unlawful. Please
> > inform us that this message has gone astray before deleting
> it. Thank you
> > for your co-operation.
> This e-mail is confidential and privileged. If you are not
> the intended
> recipient please accept our apologies; please do not
> disclose, copy or
> distribute information in this e-mail or take any action in
> reliance on its
> contents: to do so is strictly prohibited and may be
> unlawful. Please
> inform us that this message has gone astray before deleting
> it. Thank you
> for your co-operation.
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:52 GMT-3