From: folivore (folivore@hotmail.com)
Date: Wed Jun 04 2003 - 00:26:33 GMT-3
why 4 digits? Formal E.164 should be 15 digits including 3 digits country
code.
----- Original Message -----
From: "Messina, John V" <john@crimsoncti.com>
To: "CNLink Technical" <tech_support@us.cnlink.net>;
<ccielab@groupstudy.com>
Sent: Monday, June 02, 2003 6:55 PM
Subject: RE: VoIP dial-peer question
> For obvious reasons I have never used T by itself but even if
that does work a more effecient method for the scenario you desribe would be
to use
>
> ....
>
> this will route the call as soon as it matches
>
> with T it will wait until the interdigit timeout which defaults to 10
seconds
>
>
>
> -----Original Message-----
> From: CNLink Technical [mailto:tech_support@us.cnlink.net]
> Sent: Mon 6/2/2003 3:37 PM
> To: ccielab@groupstudy.com
> Cc:
> Subject: RE: VoIP dial-peer question
>
>
>
> Also
>
> +(Optional) Character indicating an E.164 standard number.
>
> Be sure to read this page completely
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/vvfa
> x_c/int_c/dpeer_c/dp_confg.htm
>
> JC Cham
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> McCallum, Robert
> Sent: Monday, June 02, 2003 6:51 AM
> To: 'Juan Manuel Munarriz Gonzalez'; ccielab@groupstudy.com
> Subject: RE: VoIP dial-peer question
>
>
> T
>
> > -----Original Message-----
> > From: Juan Manuel Munarriz Gonzalez [mailto:munarriz@satec.es]
> > Sent: 02 June 2003 13:13
> > To: ccielab@groupstudy.com
> > Subject: VoIP dial-peer question
> >
> >
> > Hello,
> >
> > I4ve seen in a lab test training a problem with a router with
> > two FXS ports and a VoIP dial-peer with extensisn 3002. The
> > router must be configure to reach the extensisn 3002 without
> > configuring a specified number. Beside this it asks for
> > configure E164 style.
> > Have you got any idea about such dial-peer configuration?.
> >
> > Thanks in advance
> > ____________________________________________
> >
> > Juan Manuel Munarriz Gonzalez
> > Dpto. Ingenieria de red
> > email: munarriz@satec.es
> >
> > SATEC/CONVEX
> > Avda. Europa 34 A
> > 28023 Aravaca MADRID (SPAIN)
> > Tlf.: +34 91 708 90 00 | +34 91 211 03 00
> > Fax.: +34 91 708 90 90 | +34 91 211 03 90
> > ____________________________________________
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:52 GMT-3